====== Candy ======

===== Components =====

==== Drivetrain ====
<del>BSA xx mm Width, 
currently square-taper Shimano ... 

3 x 7 gears,

7-speed Shimano Altus rear derailleur

3-speed Shimano ??? front mech

Shimano Altus (?) 3x7 Shift+Brake Levers (these are shit, replace them if possible)
</del>

  * Microshift Advent 1x9 
  * 11-42 teeth cassette, could be upgraded to 11-46
  * FSA cranks, with 40 teeth chainring, 120mm symmetric 4-arm spider
  * 68.4 BSA 4-Kant
  * Seat Post: 26.2 mm (!) diameter
  * Ansmann RM 9.0 Elektro-Antrieb

===== Possible Upgrades =====
  * Foldable Cargo Box Project
    * ordentlich abschneiden
  * Gewicht sparen: Box neu
  * Kiddy seat belts
  * Hollowtech (or similar) BB plus nice cranks

===== Upgrades Done =====

==== 2023-03-24 ====
  * Replaced obsolete front hub dynamo with front wheel without.
    * 1.0kg -> 0.7kg
  * Replaced rear cantilever brakes with hydraulic Magura brakes
    * cable is really long, should be shortend
    * have everything for front brake, but mounted 1.8m cable is too short. Get at least 2.5m
    * check if Magura mineral oil can be replaced with Shimano 
    * Reddit: https://www.reddit.com/r/bikewrench/comments/czprxl/has_anyone_used_shimano_mineral_oil_in_magura/

==== 2023-03-01 ====
  * Sattelstütze mit 2cm Setback, 26.2mm diamter
    * works, but clamping system is shit. Try loctite?
  * Lights installed (front and rear). Work really nicely.